Bafang B1-E-System & Troubleshooting
E-08 Error Code: Powers on but doesn't go
The E-08 error code typically indicates a communication issue with the motor’s hall sensor. Common Causes:. Common Symptoms:. In most cases, the system will power on normally, but no power is delivered to the hub motor. 1. Power off the systemTurn o
Bafang Technical FAQ Portal
This webpage is a technical troubleshooting resource used to diagnose and resolve issues with Bafang e-bike systems. It is designed primarily for service technicians and dealers, providing detailed information on error codes, component behavior, and
Bafang Hub Motor Error Codes
View Hub Motor Error Code Guide (PDF)
Understanding Battery Readouts
These are the standard readouts from the battery management system (BMS)—viewable in the info section on the Bafang display. Here’s what each one actually means in plain terms:. How to access Battery Details on the Bafang C080 display. 👉 This is cri
Bafang DP C080.CB Display–Bug Fix
If the display is running software version DPC080CBF80108.1, please update to version DPC080CBF80108.3.Bug Fix. Some Bafang DP C080.CB displays (HMI) used on the models listed below may not display data for Cell 13 within the Battery Info screen. Thi
FLUX–Bafang Stator Installation
Guidelines, Required Tools, and Procedure for Replacing the Stator on the Bafang Rear Hub Motor Used on the Pure Cycles FLUX E-Bike. The following procedure outlines the recommended steps and required tools for removing and replacing the stator assem